Nhám Scotch Brite 3M 07447 chà tay chuyên xử lý gỉ sắt, làm bóng bề mặt kim loại. Code: 3.10.540.0003 | www.thietbinhapkhau.com | Công ty PQ " Sẵn sàng cho bạn"
Danh mục
Nhám Scotch Brite 3M 07447 chà tay chuyên xử lý gỉ sắt, làm bóng bề mặt kim loại. Code: 3.10.540.0003 | www.thietbinhapkhau.com | Công ty PQ " Sẵn sàng cho bạn"
Nhám Scotch Brite 3M 07447 chà tay chuyên xử lý gỉ sắt, làm bóng bề mặt kim loại
Sản phảm 3M Scotch-Brite 07447 là loại scotch brite dùng phổ biến trên các bề mặt kim loại và gỗ với kết cấu sợi Scotch-Brite đặc biệt cho hiệu quả cao, bền bĩ mà thao tác lại cực kỳ đơn giản
Chuyên dùng để:
- Xử lý các vết trầy sướt
- Chà bỏ các lớp sơn cũ, xử lý bề mặt trước khi sơn
- Xử lý các vết gỉ sắt trên bề mặt kim loại, giúp kim loại trông như mới
- Thao tác đơn giản, dạng miếng thích hợp dùng tay, và bo góc, bo tròn
- Dể dàng thao tác mà hiệu quả rất cao
- Quy cách mỗi miếng: 150mm x 28mm
- Hộp 20 miếng
The performance of Scotch-Brite™ General Purpose Hand Pad 7447 is comparable to steel wool grade 1. However, unlike steel wool, our Scotch-Brite™ pads won't shred during use, rust after use, or create fine metal splinters. The non-woven, open-web material resists loading and can be used dry, with water or solvents, and rinsed clean for reuse. This multipurpose 6 x 9" pad can be used by hand for precise control, with a hand pad block for uniform finishing, or on an in-line sander to cover large areas.
This maroon hand pad uses aluminum oxide abrasive. Aluminum oxide is a popular choice among industrial professionals because of its cut-rate and long life. This mineral is a tough, durable abrasive that self-fractures to expose fresh cutting edges in use, whereas traditional abrasives, such as garnet, quickly wear down with use. Due to its high cut-rate, hardness, strength, and low heat retention, aluminum oxide mineral is widely used in grinding applications in addition to sanding and finishing use. Aluminum oxide is suitable on a wide variety of substrates in both woodworking and metalworking, including ferrous alloys.
Our Scotch-Brite™ industrial abrasive products are a unique surface conditioning product with abrasives incorporated into non-woven nylon or other synthetic fibers. Combining abrasives into the fibers creates an abrasive system that delivers consistent results for the life of the product. The open-web material is load resistant and keeps the abrasive minerals cutting at high performance by limiting clogging of the fibers.
Mô tả
Sản phảm 3M Scotch-Brite 07447 là loại scotch brite dùng phổ biến trên các bề mặt kim loại và gỗ với kết cấu sợi Scotch-Brite đặc biệt cho hiệu quả cao, bền bĩ mà thao tác lại cực kỳ đơn giản
Chuyên dùng để:
- Xử lý các vết trầy sướt
- Chà bỏ các lớp sơn cũ, xử lý bề mặt trước khi sơn
- Xử lý các vết gỉ sắt trên bề mặt kim loại, giúp kim loại trông như mới
- Thao tác đơn giản, dạng miếng thích hợp dùng tay, và bo góc, bo tròn
- Dể dàng thao tác mà hiệu quả rất cao
- Quy cách mỗi miếng: 150mm x 28mm
- Hộp 20 miếng
The performance of Scotch-Brite™ General Purpose Hand Pad 7447 is comparable to steel wool grade 1. However, unlike steel wool, our Scotch-Brite™ pads won't shred during use, rust after use, or create fine metal splinters. The non-woven, open-web material resists loading and can be used dry, with water or solvents, and rinsed clean for reuse. This multipurpose 6 x 9" pad can be used by hand for precise control, with a hand pad block for uniform finishing, or on an in-line sander to cover large areas.
This maroon hand pad uses aluminum oxide abrasive. Aluminum oxide is a popular choice among industrial professionals because of its cut-rate and long life. This mineral is a tough, durable abrasive that self-fractures to expose fresh cutting edges in use, whereas traditional abrasives, such as garnet, quickly wear down with use. Due to its high cut-rate, hardness, strength, and low heat retention, aluminum oxide mineral is widely used in grinding applications in addition to sanding and finishing use. Aluminum oxide is suitable on a wide variety of substrates in both woodworking and metalworking, including ferrous alloys.
Our Scotch-Brite™ industrial abrasive products are a unique surface conditioning product with abrasives incorporated into non-woven nylon or other synthetic fibers. Combining abrasives into the fibers creates an abrasive system that delivers consistent results for the life of the product. The open-web material is load resistant and keeps the abrasive minerals cutting at high performance by limiting clogging of the fibers.
Specifications
SDS
3M™ Scotch-Brite™ Products, 7447, 7467, General Purpose Pads (US)
Brochure
Catalog
Bình luận